DS 9 E-TENSE

The power and comfort of hybrid technology


Combine flexibility, comfort and performance with our E-TENSE plug-in hybrid technology. The combination of electric and petrol emphasises the enjoyment of driving, on every occasion.

Two plug-in hybrid power units available

With two power units available* (225hp and a 360hp 4-wheel drive) our E-TENSE models have CO₂ emissions ranging from 0 to 49g/km (subject to approval).

 

*E-TENSE 4x4 360 available at a later date

E-TENSE technology

Drive with complete freedom

Regenerative braking

E-SAVE function

Driving mode

Charge your battery by brakingVIEW MORE
Program how to use electric modeVIEW MORE
Choose your driving modeVIEW MORE

BENEFITS OF E-TENSE PLUG-IN HYBRID

Silent, comfortable driving

Enjoy a peaceful and silent drive when setting off in your car in Zero Emission mode. On E-TENSE models, silence inside your DS 9  is boosted by laminated glass, fitted as standard.

Drive with complete freedom

Our plug-in hybrids guarantee complete flexibility when driving in town. Behind the windscreen of our E-TENSE models, a cyan LED confirms electric mode is activated for even more comfort.

Emissions

With two engines available (225 hp and 360 hp 4WD), our E-TENSE models have emissions ranging from 33 up to 49g of CO₂ / km (subject to approval).

Boot and usability

With its long wheelbase of 2.89 meters, DS 9 offers a spacious and comfortable interior, like its elegant center armrest at the rear made of nappa leather. With a capacity of 510L, the DS 9 E-TENSE trunk is one of the largest in its segment.

E-TENSE only services

Enjoy the many services put in place by DS Automobiles to make your daily life easier: pinpoint charging points and plan your charging, or have a charger installed at home, straight from your smartphone or your car.

Plug-in hybrid power

With its two electric motors, one located at the front, the other at the rear, the power unit of E-TENSE 4x4 360 gives you up to 360hp for remarkable performance.

Calculate the range of DS 9 E-TENSE in 100% electric mode

Modify the parameters below and discover its range

SENSATIONS Discover DS 9 E-TENSE 4x4 360

Agility & performance

Get the versatility of a hybrid and the efficiency of a high-performance powertrain. With its two electric motors and four-wheel drive, DS 9 E-TENSE 4x4 360 accumulates up to 360 horsepower. This plug-in hybrid engine, the most powerful in the DS 9 range,  provides unmatched performance in the DS Automobiles range.

Technology and sophistication

Our E-TENSE plug-in hybrid models enjoy the best expertise in technology to deliver remarkable performance.

Range and charging

Run in zero emissions mode

Charging is an essential step to take full advantage of a plug-in hybrid vehicle. Calculate below your charging time according to your level of range.

CHARGING TIME

Calculate your charging time

The range of your plug-in hybrid vehicle may vary depending on various factors such as weather conditions, your speed or your driving style.

Speed

Among the factors that have the most impact on the range of your plug-in hybrid car, speed is the most important. Maintaining a constant and moderate speed will enable you to optimise the range of your car.

Driving style and elevation

Your plug-in hybrid car is particularly sensitive to driving style and exterior relief. Choose Eco mode (one of the four available driving modes), practice eco driving or use regenerative braking in order to improve energy consumption by up to 15%.

Temperature control and heating

In case of extreme heat or minus temperatures, the battery must supply the necessary energy to cool or heat the interior, which can use up to 35% more energy in winter. It is therefore preferable to pre-condition (warm or cool) your plug-in hybrid while it is still plugged into the charging point.

Find your retailer

Legal information

¹ Figures shown for fuel consumption, CO₂ emissions and range conform to the WLTP test procedure on which new vehicles have been approved since 1st September 2018. The WLTP test replaces the New European Driving Cycle (NEDC) which was the testing protocol used previously. With more realistic testing conditions, fuel consumption and CO₂ emissions measured to WLTP protocols are, in many cases, higher than those measured according to the NEDC procedure. Values for fuel consumption, CO₂ emissions and range can vary depending on conditions of use and different factors such as: frequency of charging, driving style, speed, specification, options, kinds of tyres, exterior temperature and temperature inside the vehicle. Ask your retailer for more information. More details here.